Typical “Stribeck” curves obtained by Martens showing coefficient of friction as a function of pressure in kgf/cm² (even if it looks like kg/mm²) at v = 0.5 m/s using water quenched, hardened steel shaft 99.6 mm diameter and 70.2 mm long, running in bearing shell made from “Rotguß” (red brass, a Cu-Sn-Zn cast alloy) with “Rüböl” (rape oil). The parameter lines represent temperature in °C.
Data
Fonte
Adolf Martens
Schmieröluntersuchungen (Investigations on lubrication oils)
Part I: Mitteilungen aus den Königlichen technischen Versuchsanstalten zu Berlin, Ergänzungsheft III 1888, p. 1-37, Verlag von Julius Springer, Berlin and
Part II: Mitteilungen aus den Königlichen technischen Versuchsanstalten zu Berlin, Ergänzungsheft V, 1889, p. 1-57, Verlag von Julius Springer, Berlin
Devi inserire anche un tag per il pubblico dominio relativo agli Stati Uniti per indicare perché quest'opera è nel pubblico dominio negli Stati Uniti. Nota che in alcuni Paesi i termini del copyright durano più di 70 anni: in Messico 100, in Giamaica 95, in Colombia 80, in Guatemala e Samoa 75 anni. Questa immagine potrebbe non essere nel pubblico dominio in questi Paesi, che inoltre non applicano la regola della durata più breve. L'Honduras ha un termine generale di 75 anni, ma questo paese applica la regola della durata più breve.
{.{Information |Description = Typical “Stribeck” curves obtained by Martens showing coefficient of friction as a function of “pressure” (water quenched, hardened steel shaft 99.6 mm diameter, running in bearing shell made from “Rotguß” (r
Didascalie
Aggiungi una brevissima spiegazione di ciò che questo file rappresenta
Questo file contiene informazioni aggiuntive, probabilmente aggiunte dalla fotocamera o dallo scanner usati per crearlo o digitalizzarlo. Se il file è stato modificato, alcuni dettagli potrebbero non corrispondere alla realtà.